| Model: DHD635-GS Specifications |
| Type |
Laser Projector |
| Image |
| Brightness |
• 6125 ISO lumens (typical)
• 5400 Center lumens (typical)
• 5400 ANSI lumens (typical) |
| Color wheel |
4 Segment (RGBY) – 2X or 3X speed |
| Contrast (nominal) |
• Full On/Off (Christie® RealBlack™ enabled): 4,000,000:1
• Dynamic contrast: 6000:1
• Full On/Off (Christie RealBlack disabled): 1200:1
• ANSI 250:1 |
| Display technology |
| Type |
1 x 0.65" DMD S600HB |
| Native resolution |
1920 x 1080 (2,073,600 pixels) (16:9) |
| Inputs |
| Standard |
• HDMI x 2
• DVI-D x 1 (digital only)
• HD15 x 1
• Remote in: 3.5mm stereo female (provides serial communications and power)
• HDBaseT (RJ45 x 1)
• RJ45 x 1 (Control over wired network connection) |
| 3D |
• HDMI 1.4, HDBaseT – frame packed, top/bottom, side by side/frame sequential
• Up to 120Hz output
• 3D Sync in (BNC) – for genlocking projectors
• 3D Sync out (BNC) – for genlocking projectors or controlling emitters |
| Signals |
• HDTV formats VGA through to WUXGA (1920 x 1200)
• Horizontal and vertical scaling while maintaining aspect ratio (all inputs) |
| Pixel clock |
162 MHz |
| Scan rates |
Horizontal: 15-91kHz • Vertical: 24-120Hz |
| Signal outputs |
| Monitor out |
HD15 x 1 |
| Warping & Blending |
| Warping & Blending |
Embedded warping and blending (no option board required) |
| Control and networking |
| Control and networking |
• RS232 In
• Control via HDBaseT
• Ethernet (10/100) RJ45
• Built-in backlit keypad
• IR remote
• Wired remote control (3.5mm stereo)
|
| Lens mount |
| Type |
• Boresight adjustable
• Motorized horizontal and vertical lens offset
• Motorized zoom and focus adjustment |
| Lenses |
| Offsets |
• ±60% Vertical
• ±15% Horizontal |
| Optional |
• Lens 0.75-0.95 Zoom G/GS
• Lens 0.95-1.22 Zoom G/GS
• Lens Zm Std G/599-GS 1.22-1.53 (Lowest cost for G/555/599/630-GS/635-GS)
• Lens Zoom HP G/GS 1.22-1.52 (All G & GS)
• Lens 1.52-2.89 Zoom G/GS
• Lens 2.9-5.50:1 Zoom G/GS
• Lens UST 0.36 (120") Ultra short throw lens, 630/635/700/850/1075-GS |
| Accessories |
| Standard |
• IR Remote w/wired remote jack (wire not included)
• AC line cords for projector
• User manual |
| Optional |
• Christie One Mount
• One Mount Extender Rod
• Cable Cover GS White
• One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod) |
| Power requirements |
| Operating voltage |
Normal: 100-240 VAC @ 50/60Hz (w/15A fuse) |
| Power consumption |
Normal mode: 650W |
| Operating current |
Normal mode: 9.5A (100V-240V) |
| Dissipation |
97.5W |
| Audible noise |
| (typical 2x wheel speed) |
Eco2 mode: 34dB(A) • Normal mode: 36dB(A |
| Physical |
| Size (LxWxH) |
19.9 x 17.95 x 7.6" (505 x 456 x 190mm) w/o feet or lens |
| shipping size (LxWxH) |
24.65 x 23.43 x 13.74" (626 x 596 x 349mm) |
| Weight |
39.94lbs (15.85kg) w/o lens |
| Shipping weight |
47.06lbs (21.35kg) |
| Operating environment |
| Operating environment |
• 32-104°F (0-40°C), 0-2500 ft altitude
• 32-86°F (0-30°C), 5000-10,000 ft altitude
• Humidity: 0-85% non-condensing |
| Regulatory |
| Regulatory |
• Contact Christie for timing of certifications: UL/CSA/IEC 60950-1, FCC Class A, CE, FDA, CCC, KC, PSE, CU, SABS, BIS,
VCCI, RCM, Ukr, TER, SASO
• This product conforms to all relevant European directives, standards, safety, health and environmental concerns
• RoHS, REACH, WEEE |
| Warranty |
| Warranty |
• Three years parts and labor on the projector • Three years or 15,000 hours parts and labor on the illumination system1
• Contact an authorized Christie representative for full details of our limited warranty |