| Model: D16HD-HS Specifications |
| Image |
| Brightness |
15,750 ISO lumens
14,000 ANSI lumens |
| Color wheel |
4 segment (RGBY) - 2X or 3X speed |
| Contrast (nominal) |
Full on/off (Christie RealBlack enabled): 2,000,000:1
Dynamic contrast: 5000:1
Full on/off (Christie RealBlack disabled): 1200:1
ANSI 250:1 |
| Display |
| Type |
1 x 0.96” DMD |
| Native resolution |
1920 x 1080 (2,073,600 pixels) 16:9 |
| Illumination system |
| Type |
Laser phosphor with Christie BoldColor Technology |
| Typical lifetime |
20,000 hours to 50% |
| Signal inputs |
| Standard |
HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable)
3GSDI x 1 (BNC)
DVI-D x 1 (digital only)
HD15 x 1
USB x 1 (type A) - image viewer or WiFi dongle (optional)
HDBaseT (RJ45 x 1) |
| 3D |
HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side
Up to 120Hz output
3D Sync In (BNC) - for genlocking projectors
3D Sync Out (BNC) - for genlocking projectors or controlling emitters |
| Signals |
HDTV formats VGA through to WUXGA (1920 x 1200)
Horizontal and vertical scaling while maintaining aspect ratio, all inputs |
| Pixel clock |
162 MHz |
| Scan rates |
Horizontal: 15 kHz to 91 kHz
Vertical: 24 Hz to 85 Hz |
| Signal outputs |
| Monitor out (loop through) |
3GSDI x 1 (BNC)
HDMI x 1 (HDMI out) |
| Control and networking |
RS232 In
Control via HDBaseT
Ethernet (10/100) RJ45
Built-in backlit keypad
Wired remote control (3.5mm stereo) - loop out available for daisy chaining
12VDC trigger at 200mA (ID:2.5mm) |
| Optional Accessories |
Christie One Rigging Frame |
| Warping and blending |
| Standard |
Christie Twist™ |
| Optional |
Christie Twist Premium and Twist Pro
Christie Mystique™ automated camera-based alignment |
| Lens mount |
Boresight adjustable
Motorized horizontal and vertical lens offset (memory available)
Motorized zoom and focus adjustment (memory available for full ILS lenses) |
| Lens options |
Lenses
0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens
1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens
1.2-1.5:1 zoom lens (full ILS)
1.5-2.0:1 zoom lens (full ILS)
2.0-4.0:1 zoom lens (full ILS)
4.0-7.0:1 zoom lens (full ILS) |
| Power requirements |
| Operating voltage |
Normal: 100-240VAC @ 60/50 Hz |
| Power consumption |
Normal mode: 1250W +/-15% (220V), 1300W +/-15% (110V)
ECO1 mode: 1020W +/-15% (220V), 1050W +/-15%(110V)
ECO2 mode: 700W +/-15% (220V), 700W +/-15%(110V) |
| Operating current |
Normal mode: 6.0A ±15% (220 VAC), 11.9A ±15% (110 VAC)
ECO1 mode: 4.7A ±15% (220 VAC), 9.6A ±15% (110 VAC)
ECO2 mode: 6.5A ±15% (220 VAC), 3.2A ±15% (110 VAC) |
| Dissipation |
Normal mode: 4450 BTU/hr
ECO1 mode: 3600 BTU/hr
ECO2 mode: 2450 BTU/hr |
| Audible noise |
Typical: 45dB(A)
Eco mode: 39dB(A) |
| Physical Specifications |
| Dimensions |
(L x W x H) 26.65 x 23.46 x 7.99" (677 x 596 x 203mm) without feet |
| Weight (without lens) |
93.7 lb (42.5 kg) |
| Shipping dimensions |
(L x W x H) 36.34 x 33.19 x 20.20" (923 x 843 x 513mm) |
| Shipping weight |
119 lb (54 kg) |
| Operating environment |
Temp: 0 to 40° C (32 to 104° F)
Humidity: 0 - 85% non-condensing |
| Regulatory |
Contact Christie for the timing of certifications: |
| Limited warranty |
Three years parts and labor on the projector
Three years or 15,000 hours parts and labor on the illumination system
Contact an authorized Christie representative for full details of our limited warranty |