| Model: D13HD2-HS Specifications |
| ISO lumens |
13,000 |
| Contrast ratio |
Full On/Off (Christie Real Black enabled): 750,000:1 , Full On/Off (Christie Real Black disabled): 1,200:1 |
| Resolution |
HD (1920 x 1080) |
| Scan rates |
Horizontal: 15-91kHz Vertical: 24-85Hz |
| 3D inputs |
- HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side
1920 x 1080 at 120Hz output
- 3D Sync In (BNC) - for genlocking projectors
- 3D Sync Out (BNC) - for genlocking projectors or controlling emitters
- Horizontal and vertical scaling while maintaining aspect ratio, all inputs |
| Lens mount |
Lenses:
0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens
1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens
1.2-1.5:1 zoom lens (full ILS)
1.5-2.0:1 zoom lens (full ILS)
2.0-4.0:1 zoom lens (full ILS)
4.0-7.0:1 zoom lens (full ILS)
Offsets (Full ILS lenses) :
+/- 133% vertical (+/- 720 pixels)
+/- 50% horizontal (+/- 480 pixels)
+/- 50% horizontal (+/- 480 pixels)
+110 / -86% vertical (+596/-466 pixels)
+34 / -39% horizontal (+330/-376 pixels)
Offsets 1.02-1.36:1
+125 / -98 % vertical (+676/-534 pixels)
+42 / -47% horizontal (+408/-457 pixels) |
| Dimensions (L x W x H) |
26.65 x 23.46 x 7.99" without feet
677 x 596 x 203mm without feet
Shipping dimensions:
36.34 x 33.19 x 20.20"
923 x 843 x 513mm |
| Regulatory |
- Contact Christie for the timing of certifications:
- TUV UL/CSA/IEC 60950-1 FCC Class A CE FDA CCC KC PSE CU SABS BIS VCCI RCM Ukr TER SASO
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS REACH WEEE |
| ANSI lumens |
11,500 |
| Dynamic contrast |
6000:1 |
| Illumination type |
Laser phosphor with Christie BoldColor Technology |
| Pixel clock rate |
162MHz |
| Signal output: |
- 3GSDI (BNC)
- DVI-D (digital only) |
| Power requirements |
Operating voltage:
- Normal: 120-240VAC @ 60/50 Hz with 15A fuse
Power consumption:
- Normal mode: 1220W +/-15% (220V), 1300W +/-15% (100V)
- ECO1 mode: 1000W +/-15% (220V), 1050W +/-15%(100V)
- ECO1 mode: 1000W +/-15% (220V), 1050W +/-15%(100V)
Operating current:
- Normal mode: 7A (200-240VAC), 14A (100-120VAC)
Dissipation:
- Normal mode: 4435 BTU/hr
- Normal mode: 4435 BTU/hr
- ECO2 mode: 2390 BTU/hr |
| Weight |
- 93.7 lb (42.5 kg)
- Shipping weight: 119 lb (54 kg) |
| Limited warranty |
- Three years parts and labor on the projector
- Three years or 20,000 hours parts and labor on the illumination system*
- Contact an authorized Christie representative for full details of our limited warranty
- *Please reference the Christie Standard Limited Warranty document for details. |
| Color wheel |
4 Segment (RGBY) - 2X or 3X speed |
| Display type |
1 x 0.95" DMD |
| Illumination performance (hrs) |
20,000 |
| Signal inputs |
- HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable)
- 3GSDI (BNC)
- DVI-D (digital only)
- HD15
- USB (type A) - (WiFi dongle optional)
- HDBaseT (RJ45)
- RJ45 (ChristiePresenter over wired network connection) |
| Control and networking |
- RS232 In
- Control via HDBaseT
- Ethernet (10/100) RJ45
- Built-in backlit keypad
- Wired remote control (3.5mm stereo) - loop out available for daisy chaining |
| Audible noise |
- Typical: 39dB(A)
- Eco mode: 37dB(A) |
| Operating environment |
- Temp: 0 to 40° C (32 to 104° F)
- Humidity: 0 - 85% non-condensing |