Bretford FP42MUL-E5BK - Flat Panel Cart w/Laptop Shelf, 6-Outlet Electrical Assembly, 26-42" FP

The Bretford FP42MUL-E5BK is a flat panel multimedia cart that includes a 6-outlet electrical unit and a standing height pull-out laptop shelf for interactive multimedia presentations. The pull-out shelf is rated for 15 lbs. of equipment.

This cart is stability and load tested for safe use with a flat panel monitor up to 75 lbs. Any size monitor is appropriate as long as it does not exceed the maximum weight load, suggested for use with 26" to 42" flat panels. Certified by Underwriter Laboratories to standard 1667 for tall institutional carts.

A universal mounting bracket is adjustable to fit the unique VESA mounting hole pattern on the back of your monitor up to 700 mm wide by 400 mm tall, so there is no guesswork on what monitor you can use. And you don’t need a new cart just because you changed monitors.

A top-shelf handle makes it easier to push the cart from one location to another by providing additional room to walk behind the cart. Shelves measure 32"w x 27"d and the top and middle shelves include a 3" diameter grommet hole at the rear to keep cables in place and reduce the risk of snagging during transport. Shelves are rated to support 50 lbs. of equipment each. The middle shelf has 12" of clearance (8" under the laptop shelf ) and is ideal for use with a DVD, speakers, or other components.

The cart comes with 5" swivel casters that make it easy to transport monitors across the room or across campus.

Environmental

This cart is constructed using “prime” steel which has a 25% to 35% post-consumer recycled content and all steel components are recyclable at the end of the product life cycle.

Electrical Unit

The electrical assembly includes six (6) grounded outlets, a 20 ft.3-wire power cord, cord winder, on/off switch, and surge/overload protection. Units attach to pre-drilled holes in the middle shelf and are UL listed.

Safety Rating

This cart is certified by Underwriter Laboratories to comply with UL standard 1667 for tall institutional carts and is designated for use with flat-panel monitors up to 75lbs. Shelves are rated for 50 lbs each except for the pull-out shelf which is rated for 15 lbs. Certified for the United States and Canadian markets

Monitor Mounting

The monitor assembly has two arms that secure to the mounting holes in the back of the monitor and hang on a horizontal plate that secures between the rear leg assemblies. Arms are adjustable to fit the mounting hole pattern on the back of the monitor from 100 mm to 700 mm wide and 100 mm to 400 mm high.