The Bretford ECILS3FF-BK multimedia height adjustable cabinet cart is designed for computer projection in the classroom, training room, or anywhere a laptop drives the presentation. It has one (1) 32-1/2"w x 24-1/4"d, 18-gauge steel top shelf with 20-gauge steel stiffener and open corners so the sides of the shelf do not connect. The upper leg assembly fits flush to the top shelf and attach with a 13-gauge steel “W” bracket design that interlocks the legs and shelves for maximum strength and stability. Upper leg assemblies are 1-1/2" square tubular 18-gauge steel and fit over the lower 1" square tubular 18-gauge steel leg assemblies for height adjustability of the top shelf. Lower leg assemblies form the corners of the lower cabinet and attach to the upper and lower shelves with a 13-gauge steel “W” mounting bracket with 1⁄4" square head bolts and hex nuts that hold leg securely to table.
 
Perforated 20-gauge steel cabinet side panels mount using the square head bolts that secure the shelves to the legs. Cabinet interior is 32"w x 23-3/4"d x 15-7/8"h; cabinet doors are 14"h. Each lower leg has a hard plastic caster insert mounted in the bottom of the tube. The ECILS3FF-BK cart has one (1) 29"w x 13"d, 18-gauge steel pull-out shelf that extend off the front side. Shelf is height adjustable with the top shelf and may be set from 26-1/2" to 34-1/2"h in 1" increments. There is 2" clearance under the top shelf when pull out shelf is pushed in.
 
The ECILS3FF-BK cart includes a surge and overload protected 12-outlet electrical assembly with on/off switch and 20' 3-wire cord and two (2) 3/16" diameter machine screws with nuts for attaching unit to the back panel of the cabinet. Stem casters are mar-resistant, hard black rubber and 4" in diameter. Each caster assembly has ball bearing swivel capabilities, steel construction and is load rated for 115 lbs. each. Two (2) have locking brakes. The ECILS3FF-BK cart is finished in black power paint.
 
The ECILS3FF-BK multimedia height adjustable cart is constructed using “prime” steel which has a 25% to 35% post-consumer recycled content and is recyclable at the end of the product life cycle. It is certified to GREENGUARD children & schools indoor air quality standards. Made in USA!