The Planar TV PlayerTVH is a TV Player Controller for TV LED Display. It connects the video processor with the LED display and transfers HDMI signal to LVD. It has an RS232 and standard RJ45 port, 5V power supply input (LVDS signal cable can supply power to display without extra 5V power supply, 2 HDMI input ports and LVDS output port. Its HDMI input ports are digital interfaces based on 1.3 protocol, supporting HDCP decryption. HDMI I has higher priority than HDMI II. Signal will input per HDMI I when there are inputs on both ports and input will shift to HDMI II once HDMI I is damaged. The TV player can support 2D and 3D video source. It has a max input resolution of 1920*1200@60p; output resolution is different from input resolution after TV player transfer. Below is input/output resolution datasheet:
 

TVPlayer 3D Synchronous signal lines (as shown below - left figure) can receive signal source to sync signals to realize 3D signal concatenation among multiple sets of TV Player. 3D signal projector (as shown below - right figure). It can sync 3D glasses switching frequency and 3D video. It should insert into any free data output port and only can be used to 3D screen.

Loop function screen circuits connection: Seen from the back of the screen, the main TV Player controller in the left has circuits entering it from the lower left import, and the backup TV Player controller in the right has circuits entering in it from the upper import. Each cabinet has dual AC power supply.