The MimioTeach system uses a rechargeable stylus. The internal battery retains a charge for 10 to 12 hours of continuous use, and fully recharges in 5 hours. Just dock it on the MimioTeach bar at the end of class to recharge it. Charging for ten-minutes can help you out in an emergency. We recommend charging the stylus overnight before using it for the first time and when not in use for maximum performance. Your days of worrying about replacing batteries are over.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The Writing Recognition feature within Mimio Studio can be used to convert live writing into editable text (to enter text into applications during interactive use) or as a post-processing tool to convert previously written notes into editable text in a Notebook file. There are two Text Tools within mimio Studio which support live writing conversion: Write Anywhere and Writing Pad. These tools can be selected by right-clicking on the Text Tool icon in the Windows notification area in the lower right corner of the screen. The post-processing writing recognition tool requires handwritten notes to be selected within mimio Notebook. Once handwritten notes are selected, right-click within the selected notes and choose the option to Recognize Ink.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

DYMO/Mimio offers a two-year warranty on all hardware products. The warranty is extendable to five years when you register online at http://www.mimio.dymo.com/en-US/Support/ProductRegistration.aspx. The MimioVote handset batteries have a two-year warranty. Battery replacements are available for purchase. The MimioStudio software product has a limited lifetime warranty that expires one year after discontinuation of the product.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The MimioTeach system is used with a projector, which allows you to project your entire laptop screen on the whiteboard. You can deliver and interact with lessons and presentations directly from your PC.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Two buttons on the stylus activate functions: Hover/Right Click and MimioStudio Tools. For left mouse click, touch the projected area with the tip of the stylus twice.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Yes, the Mimio Teach was listed as a 2012 Readers'' Choice Top 100 Product in District Administration Magazine.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Yes, the same Mimio Classroom products can be used for both PC and Mac. Yes, there is different software for each platform that can be downloaded from the Support tab of the mimio.com web site

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The amber LED indicates that the MimioTeach stylus or the MimioCapture pens and eraser needs to be charged. We recommend charging the stylus overnight before using it for the first time and when not in use for maximum performance. Please note that when the MimioTeach is running off of battery power, the stylus will not charge. Please plug the MimioTeach bar or the MimioCapture Tray directly into the computer with the USB cable or use the provided USB adapter to plug into the wall and the units will charge. Official testing has shown that on a single charge, the stylus batteries will last approximately 11 continuous hours. This means 11 straight hours of the tip being depressed. After a minute of the tip being depressed, there is an automatic shutoff, so the signal will stop being transmitted. Most use cases of the stylus show that it is used at very short intervals (in the length of seconds). Therefore, the actual use time it would take for the battery to deplete entirely is pushed to the hundreds of hours. Effectively, the stylus battery power should never fully deplete, but if it does, a five minute charge will last about 30 minutes of use.. The styli and eraser will recharge completely in their tray in about three hours.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The MimioTeach system does not project an image. A separate projector is required to display the computer’s image onto the whiteboard. The MimioTeach system provides the technology to control the computer from the whiteboard. Any LCD or DLP projector will work. We recommend brightness between 1500-2500 lumens. (Minimum recommended resolution is XGA.)

I found this helpful (1)

Inaccurate? (3)

Answered by Anonymous