| Model: D13WU-HS Specifications |
| Description |
1DLP Laser Projection with Super-Quiet Operation |
| Image |
| Brightness |
13,500 ISO lumens
12,500 center lumens
12,000 ANSI lumens |
| Color wheel |
4 segment (RGBY) - 2X or 3X speed |
| Contrast (nominal) |
750,000:1 full on/off (Christie RealBlack enabled)
Dynamic contrast: 7,500:1
1,200:1 full on/off (Christie RealBlack disabled)
250:1 ANSI |
| Display |
| Type |
1 x 0.96” DMD |
| Native resolution |
1920 x 1200 (2,304,000 pixels) 16:10 |
| Illumination system |
| Type |
Laser phosphor with Christie BoldColor Technology |
| Typical lifetime |
20,000 hours |
| Signal inputs |
| Standard |
HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable)
3GSDI x 1 (BNC)
DVI-D x 1 (digital only)
HD15 x 1
USB x 1 (type B mini) - display over USB
USB x 1 (type A) - image viewer or WiFi dongle (optional)
HDBaseT (RJ45 x 1)
RJ45 x 1 (ChristiePresenter over wired network connection) |
| 3D |
HDMI 1.4, HDBaseT - frame packed, top/bottom, side-by-side
Up to 120Hz output
3D Sync In (BNC) - for genlocking projectors
3D Sync Out (BNC) - for genlocking projectors or controlling emitters |
| Signals |
HDTV formats VGA through to WUXGA (1920 x 1200)
Horizontal and vertical scaling while maintaining aspect ratio, all inputs |
| Pixel clock |
162 MHz |
| Scan rates |
Horizontal: 15 kHz to 91 kHz
Vertical: 24 Hz to 85 Hz |
| Signal outputs |
| Monitor out (loop through) |
3GSDI x 1 (BNC)
DVI-D x 1 (digital only) |
| Control and networking |
RS232 In
Control via HDBaseT
Ethernet (10/100) RJ45 with ChristieNET connectivity
Built-in backlit keypad
Wired remote control (3.5mm stereo) - loop out available for daisy chaining |
| Accessories |
| Standard |
IR remote w/ wired remote jack (wire not included)
AC line cords for projector head
User manual |
| Optional |
Christie One Rigging Frame
Lens adapter for E Series lenses
1DWUSB-BGN (wireless dongle for video and control)
HS fog filter covers + filters (order once per projector then only filters refills)
HS fog filter refills (1 set)
Christie One Mount Plus
One Mount Extender Rod
One Mount Rigging Kit (used with One Mount, One Mount Plus and/or One Mount Extender Rod)
Replacement remote control |
| Lens mount |
Boresight adjustable
Motorized horizontal and vertical lens offset (memory available)
Motorized zoom and focus adjustment (memory available for full ILS lenses) |
| Lens options |
| Lenses |
0.84-1.02:1 zoom lens (no zoom/focus memory) - adapted 1.2-1.5:1 E Series lens
1.02-1.36:1 zoom lens (no zoom/focus memory) - adapted 1.5-2.0:1 E Series lens
1.2-1.5:1 zoom lens (full ILS)
1.5-2.0:1 zoom lens (full ILS)
2.0-4.0:1 zoom lens (full ILS)
4.0-7.0:1 zoom lens (full ILS) |
| Offsets (Full ILS lenses) |
+/- 120% vertical (+/- 720 pixels)
+/- 50% horizontal (+/- 480 pixels) |
| Offsets 0.84-1.02:1 |
+37 / -60% vertical (+222/-363 pixels)
+11 / -50% horizontal (+107/-480 pixels) |
| Offsets 1.02-1.36:1 |
+125 / -98 % vertical (+676/-534 pixels)
+42 / -47% horizontal (+408/-457 pixels) |
| Power requirements |
| Operating voltage |
Normal: 100-120 VAC / 200-240VAC @ 60/50 Hz |
| Power consumption |
Normal mode: 1220W +/-15% (220V), 1300W +/-15% (100V)
ECO1 mode: 1000W +/-15% (220V), 1050W +/-15%(100V)
ECO2 mode: 660W +/-15% (220V), 700W +/-15%(100V) |
| Operating current |
Normal mode: 7A (200-240VAC), 14A (100-120VAC) |
| Dissipation |
Normal mode: 4435 BTU/hr
ECO1 mode: 3580 BTU/hr
ECO2 mode: 2390 BTU/hr |
| Audible noise |
Typical: 39dB(A)
Eco mode: 37dB(A) |
| Physical specs |
| Dimensions |
(L x W x H) 26.65 x 23.46 x 7.99" (677 x 596 x 203mm) without feet |
| Weight (without lens) |
93.7 lb (42.5 kg) |
| Shipping dimensions |
(L x W x H) 36.34 x 33.19 x 20.20" (923 x 843 x 513mm) |
| Shipping weight |
119 lb (54 kg) |
| Operating environment |
Temp: 0 to 40° C (32 to 104° F)
Humidity: 0 - 85% non-condensing |
| Regulatory |
| Contact Christie for the timing of certifications |
TUV
UL/CSA/IEC 60950-1
FCC Class A
CE
FDA
CCC
KC
PSE
CU
SABS
BIS
VCCI
RCM
Ukr
TER
SASO |
| This product conforms to all relevant European directives, standards, safety, health and environmental concerns |
RoHS
REACH
WEEE |
| Limited warranty |
Three years parts and labor on the projector
Three years or 15,000 hours parts and labor on the illumination system*
Contact an authorized Christie representative for full details of our limited warranty |